A History of Science, vol 3 by Henry Smith Williams (important of reading books txt) đź“–
- Author: Henry Smith Williams
- Performer: -
Book online «A History of Science, vol 3 by Henry Smith Williams (important of reading books txt) 📖». Author Henry Smith Williams
“Two hundred and three feet of copper wire in one length were passed round a large block of wood; other two hundred and three feet of similar wire were interposed as a spiral between the turns of the first, and metallic contact everywhere prevented by twine. One of these helices was connected with a galvanometer and the other with a battery of a hundred pairs of plates four inches square, with double coppers and well charged. When the contact was made, there was a sudden and very slight effect at the galvanometer, and there was also a similar slight effect when the contact with the battery was broken. But whilst the voltaic current was continuing to pass through the one helix, no galvanometrical appearances of any effect like induction upon the other helix could be perceived, although the active power of the battery was proved to be great by its heating the whole of its own helix, and by the brilliancy of the discharge when made through charcoal.
“Repetition of the experiments with a battery of one hundred and twenty pairs of plates produced no other effects; but it was ascertained, both at this and at the former time, that the slight deflection of the needle occurring at the moment of completing the connection was always in one direction, and that the equally slight deflection produced when the contact was broken was in the other direction; and, also, that these effects occurred when the first helices were used.
“The results which I had by this time obtained with magnets led me to believe that the battery current through one wire did, in reality, induce a similar current through the other wire, but that it continued for an instant only, and partook more of the nature of the electrical wave passed through from the shock of a common Leyden jar than of that from a voltaic battery, and, therefore, might magnetize a steel needle although it scarcely affected the galvanometer.
“This expectation was confirmed; for on substituting a small hollow helix, formed round a glass tube, for the galvanometer, introducing a steel needle, making contact as before between the battery and the inducing wire, and then removing the needle before the battery contact was broken, it was found magnetized.
“When the battery contact was first made, then an unmagnetized needle introduced, and lastly the battery contact broken, the needle was found magnetized to an equal degree apparently with the first; but the poles were of the contrary kinds.”[3]
To Faraday these experiments explained the phenomenon of Arago’s rotating disk, the disk inducing the current from the magnet, and, in reacting, deflecting the needle. To prove this, he constructed a disk that revolved between the poles of an electromagnet, connecting the axis and the edge of the disk with a galvanometer.
“… A disk of copper, twelve inches in diameter, fixed upon a brass axis,” he says, “was mounted in frames so as to be revolved either vertically or horizontally, its edge being at the same time introduced more or less between the magnetic poles. The edge of the plate was well amalgamated for the purpose of obtaining good but movable contact; a part round the axis was also prepared in a similar manner.
“Conductors or collectors of copper and lead were constructed so as to come in contact with the edge of the copper disk, or with other forms of plates hereafter to be described. These conductors we’re about four inches long, one-third of an inch wide, and one-fifth of an inch thick; one end of each was slightly grooved, to allow of more exact adaptation to the somewhat convex edge of the plates, and then amalgamated. Copper wires, one-sixteenth of an inch in thickness, attached in the ordinary manner by convolutions to the other ends of these conductors, passed away to the galvanometer.
“All these arrangements being made, the copper disk was adjusted, the small magnetic poles being about one-half an inch apart, and the edge of the plate inserted about half their width between them. One of the galvanometer wires was passed twice or thrice loosely round the brass axis of the plate, and the other attached to a conductor, which itself was retained by the hand in contact with the amalgamated edge of the disk at the part immediately between the magnetic poles. Under these circumstances all was quiescent, and the galvanometer exhibited no effect. But the instant the plate moved the galvanometer was influenced, and by revolving the plate quickly the needle could be deflected ninety degrees or more.”[4]
This rotating disk was really a dynamo electric machine in miniature, the first ever constructed, but whose direct descendants are the ordinary dynamos.
Modern dynamos range in power from little machines operating machinery requiring only fractions of a horsepower to great dynamos operating street-car lines and lighting cities; but all are built on the same principle as Faraday’s rotating disk. By this discovery the use of electricity as a practical and economical motive power became possible.
STORAGE BATTERIESWhen the discoveries of Faraday of electromagnetic induction had made possible the means of easily generating electricity, the next natural step was to find a means of storing it or accumulating it. This, however, proved no easy matter, and as yet a practical storage or secondary battery that is neither too cumbersome, too fragile, nor too weak in its action has not been invented. If a satisfactory storage battery could be made, it is obvious that its revolutionary effects could scarcely be overestimated. In the single field of aeronautics, it would probably solve the question of aerial navigation. Little wonder, then, that inventors have sought so eagerly for the invention of satisfactory storage batteries. As early as 1803 Ritter had attempted to make such a secondary battery. In 1843 Grove also attempted it. But it was not until 1859, when Gaston Planche produced his invention, that anything like a reasonably satisfactory storage battery was made. Planche discovered that sheets of lead immersed in dilute sulphuric acid were very satisfactory for the production of polarization effects. He constructed a battery of sheets of lead immersed in sulphuric acid, and, after charging these for several hours from the cells of an ordinary Bunsen battery, was able to get currents of great strength and considerable duration. This battery, however, from its construction of lead, was necessarily heavy and cumbersome.
Faure improved it somewhat by coating the lead plates with red-lead, thus increasing the capacity of the cell. Faure’s invention gave a fresh impetus to inventors, and shortly after the market was filled with storage batteries of various kinds, most of them modifications of Planche’s or Faure’s. The ardor of enthusiastic inventors soon flagged, however, for all these storage batteries proved of little practical account in the end, as compared with other known methods of generating power.
Three methods of generating electricity are in general use: static or frictional electricity is generated by “plate” or “static” machines; galvanic, generated by batteries based on Volta’s discovery; and induced, or faradic, generated either by chemical or mechanical action. There is still another kind, thermo-electricity, that may be generated in a most simple manner. In 1821 Seebecle, of Berlin, discovered that when a circuit was formed of two wires of different metals, if there be a difference in temperature at the juncture of these two metals an electrical current will be established.
In this way heat may be transmitted directly into the energy of the current without the interposition of the steam-engine. Batteries constructed in this way are of low resistance, however, although by arranging several of them in “series,” currents of considerable strength can be generated. As yet, however, they are of little practical importance.
About the middle of the century Clerk-Maxwell advanced the idea that light waves were really electromagnetic waves. If this were true and light proved to be simply one form of electrical energy, then the same would be true of radiant heat. Maxwell advanced this theory, but failed to substantiate it by experimental confirmation. But Dr. Heinrich Hertz, a few years later, by a series of experiments, demonstrated the correctness of Maxwell’s surmises. What are now called “Hertzian waves” are waves apparently identical with light waves, but of much lower pitch or period. In his experiments Hertz showed that, under proper conditions, electric sparks between polished balls were attended by ether waves of the same nature as those of light, but of a pitch of several millions of vibrations per second. These waves could be dealt with as if they were light waves—reflected, refracted, and polarized.
These are the waves that are utilized in wireless telegraphy.
ROENTGEN RAYS, OR X-RAYS
In December of 1895 word came out of Germany of a scientific discovery that startled the world. It came first as a rumor, little credited; then as a pronounced report; at last as a demonstration. It told of a new manifestation of energy, in virtue of which the interior of opaque objects is made visible to human eyes. One had only to look into a tube containing a screen of a certain composition, and directed towards a peculiar electrical apparatus, to acquire clairvoyant vision more wonderful than the discredited second-sight of the medium. Coins within a purse, nails driven into wood, spectacles within a leather case, became clearly visible when subjected to the influence of this magic tube; and when a human hand was held before the tube, its bones stood revealed in weird simplicity, as if the living, palpitating flesh about them were but the shadowy substance of a ghost.
Not only could the human eye see these astounding revelations, but the impartial evidence of inanimate chemicals could be brought forward to prove that the mind harbored no illusion. The photographic film recorded the things that the eye might see, and ghostly pictures galore soon gave a quietus to the doubts of the most sceptical. Within a month of the announcement of Professor Roentgen’s experiments comment upon the “X-ray” and the “new photography” had become a part of the current gossip of all Christendom.
It is hardly necessary to say that such a revolutionary thing as the discovery of a process whereby opaque objects became transparent, or translucent, was not achieved at a single bound with no intermediate discoveries.
In 1859 the German physicist Julius Plucker (1801-1868) noticed that when there was an electrical discharge through an exhausted tube at a low pressure, on the surrounding walls of the tube near the negative pole, or cathode, appeared a greenish phosphorescence.
This discovery was soon being investigated by a number of other scientists, among others Hittorf, Goldstein, and Professor (now Sir William) Crookes. The explanations given of this phenomenon by Professor Crookes concern us here more particularly, inasmuch as his views did not accord exactly with those held by the other two scientists, and as his researches were more directly concerned in the discovery of the Roentgen rays. He held that the heat and phosphorescence produced in a low-pressure tube were caused by streams of particles, projected from the cathode with great velocity, striking the sides of the glass tube. The composition of the glass seemed to enter into this phosphorescence also, for while lead glass produced blue phosphorescence, soda glass produced a yellowish green. The composition of the glass seemed to be changed by a long-continued pelting of these particles, the phosphorescence after a time losing its initial brilliancy, caused by the glass becoming “tired,” as Professor Crookes said. Thus when some opaque substance, such as iron, is placed between the cathode and the sides of the glass tube so that it casts a shadow in a certain spot on the glass for some little time, it is found on removing the opaque substance or changing its position that the area of glass at first
Comments (0)