author - "Gene Allen Martin"
close together over ends of wire in order to join neatly and prevent their working loose. Slash buckram inside headsize wire every half inch and turn pieces up. This makes small flaps to which crown may be fastened later. The brim may now be tried on and changes made if necessary.
EDGE WIRE--
This is cut from frame wire and must be long enough to reach around edge of brim and lap one inch. Edge wire is always sewed on same side of brim as the headsize wire, which is usually the smooth side. Shape this wire to conform to shape of brim. Never depend on the hat or the stitches to hold a wire in place. Begin at center-back of hat holding wire toward you, and sewing from right to left. Hold wire as near the edge as possible, without letting it slip over the edge. Sew on with overcasting stitch, taking two stitches in same hole. Take the stitches just the depth of the wire. If too shallow, the wire will slip off over the edge, or, if too deep, the wire will slip back away from the edge leaving it unp
close together over ends of wire in order to join neatly and prevent their working loose. Slash buckram inside headsize wire every half inch and turn pieces up. This makes small flaps to which crown may be fastened later. The brim may now be tried on and changes made if necessary.
EDGE WIRE--
This is cut from frame wire and must be long enough to reach around edge of brim and lap one inch. Edge wire is always sewed on same side of brim as the headsize wire, which is usually the smooth side. Shape this wire to conform to shape of brim. Never depend on the hat or the stitches to hold a wire in place. Begin at center-back of hat holding wire toward you, and sewing from right to left. Hold wire as near the edge as possible, without letting it slip over the edge. Sew on with overcasting stitch, taking two stitches in same hole. Take the stitches just the depth of the wire. If too shallow, the wire will slip off over the edge, or, if too deep, the wire will slip back away from the edge leaving it unp